For Vpn Do I Need Mac Address Of Work Station Or Router

FOR VPN DO I NEED ADDRESS OF WORK STATION OR ROUTER PASSWORD TO THE

This the part of your device that allows you to connect to the Internet. Assigned to the PPP adapter as shown in the table below: Working VPN Client.A MAC address is the unique identifier of a network adapter. If 802.1x authentication is enabled on the interface, the system displays an error message when you run the mac-authen command.VPN clients with a private IP address will be able to make an outgoing VPN. It is important to understand the following: o In router mode, this address will be used to access the mGuardвЂ™s web interface, via the LAN port.802.1x authentication and MAC address authentication cannot be enabled on the same interface. Configuration internal IP address (mGuard IP address of LAN) When in router mode, this is the IP address that you wish to give to the mGuardвЂ™s internal LAN interface.

For Vpn Do I Need Address Of Work Station Or Router Password To The

In versions earlier than V300R019C11, the authentication domain is configured using the mac-authen domain command. If the user MAC address is used as the user name, the AR sends the MAC address of the user terminal as the user name and password to the authentication server. Run the display mac-authen command to check the configuration of global MAC address authentication.MAC address authentication supports two user name formats: fixed user name and MAC address. If MAC address authentication is not configured on the interface, the global configuration is used. Check the configuration of the user name for MAC address authentication.Run the display this command in the interface view to check the configuration of MAC address authentication on the interface. Through the MAC address, a router knows to which device it has to send certain data, for example.This file can be tailored to make VPP run as desired, but contains default values for typical installations.

For details on RADIUS troubleshooting and HWTACACS troubleshooting, see RADIUS Authentication Fails and HWTACACS Authentication Fails. In addition, check whether dynamic authorization information is configured on the server. If RADIUS or HWTACACS authentication is configured for the user domain, check whether the user account and the user attributes are created on the authentication server. Ensure that the IP address and port of the authentication server are set correctly in the template and that the user name format and shared key specified in the template are the same as those on the authentication server.Check the authentication scheme applied to the user domain on the AR.

Check the configuration of the authentication server. To allow the user to go online, disable the accounting function in the user domain or run the accounting start-fail online command in the accounting scheme view to configure the AR to keep the user online after the accounting fails. If accounting is configured on the AR but the authentication server does not support accounting, the user will be forced offline after going online. If the authentication scheme is none, go to step 5.Run the display accounting-scheme command to check the accounting scheme. If not, run the local-user command to create the local user name and password. If local authentication is configured for the user domain, run the display local-user command to check whether the local user name and password are created on the AR.

Run the display mac-authen interface interface-type interface-number command on the AR to check whether the number of online MAC address authentication users has reached the maximum.If the number of online MAC address authentication users has reached the maximum, the AR does not trigger authentication for subsequent users, and they cannot go online. The value ranges from 10000 to 10999.Allows users matching the rules to access the network.Prohibits users matching the rules from accessing the network.Indicates a keyword in the ACL, including src-ip (source IP address), src-ipmask (mask of source IP address), and tcp-srcport (source TCP port number).Specifies the value of a keyword, which can be an IP address, a mask, or a port number.If the configurations of the AR and the authentication server are correct, go to step 5. Ensure that the ACL format used by the authentication server is the same as that required by the AR.Specifies the ACL number. To rectify the fault, create the ACL. To rectify the fault, create the VLAN.If user attributes on the authentication server contain ACL authorization information (ACL number or ACL content), but the ACL is not created on the AR or the ACL format is different from that required by the AR, user authorization fails. If user attributes on the authentication server contain VLAN authorization information but the VLAN is not created on the AR, user authorization fails.

For Vpn Do I Need Mac Address Of Work Station Or Router